Home > Products > Switching Power Supply > DR Series Single Output Industrial DIN Rail Power Supply

DR Series Single Output Industrial DIN Rail Power Supply

30W Single Output Industrial DIN Rail Power Supply (Model: DR-30-5/12/15/24)

Input: 85 ~ 264VAC 120 ~ 370VDC
Modulation System: PWM
MTBF: 441.5K hrs min. MIL-HDBK-217F (25'C)
Safety Standard: En60950
Description:
INQUIRY EMAIL

DR Series Single Output Industrial DIN Rail Power Supply

Features

1. Universal AC input/Full range
2. Protections: Short circuit / Overload / Over voltage
3. Cooling by free air convection
4. Can be installed on DIN rail TS-35/7.5 or 15
5. Isolation class I
6. LED indicator for power on
7. 100% full load burn-in test
8. 2 years warranty

Technical Parameters

MODEL		DR-30-5	DR-30-12	DR-30-15	DR-30-24
OUTPUT	DC VOLTAGE	5V	12V	15V	24V
	RATED CURRENT	3A	2A	2A	1.5A
	CURRENT RANGE	0-3A	0-2A	0-2A	0-1.5A
	RATED POWER	15W	24W	30W	36W
	RIPPLE & NOISE (max.) Note.2	800mVp-p	120mVp-p	120mVp-p	150mVp-p
	VOLTAGE ADJ. RANGE	4.75-5.5V	10.8-13.2V	13.5-16.5V	21.6-26.4V
	VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±1.0%	±1.0%	±1.0%	±1.0%
	LOAD REGULATION	±1.0%	±1.0%	±1.0%	±1.0%
	SETUP, RISE TIME	100ms, 30ms/230VAC 100ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	100ms/230VAC 21 ms/115VAC at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC 120-370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	74%	81%	82%	83%
	AC CURRENT (Typ.)	0.88A/115VAC 0.48A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 15A/115VAC,30A/230VAC
PROTECTION	OVERLOAD	105 -160% rated output power
	OVERLOAD	Protection type: Constant current limiting, recovers automatically after fault condition is removed
	OVERVOLTAGE	5.75-6.75V	13.8-16.2V	17.25-20.25V	27.6 -32.4V
	OVERVOLTAGE	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-20 ~ +60"C (Refer to "Derating Curve")
	WORKING HUMIDITY	20 - 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85"C, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/"C (0 ~ 50'C)
	VIBRATION	10 ~ 500Hz, 2G 10min./1 cycle, period for60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	Design refer to EN50178
	WITHSTAND VOLTAGE	l/P-0/P:1.5KVAC l/P-FG:1.5KVAC 0/P-FG:0.5KVAC
	ISOLATION RESISTANCE	l/P-0/P:100M Ohms / 500VDC / 25'C/ 70% RH
	EMC EMISSION	Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
OTHERS	MTBF	441,5K hrs min. MIL-HDBK-217F (25'C)
	DIMENSION	78×93×56mm (W×H×D)
	PACKING	0.27Kg; 48pcs/14Kg/1.02CUFT
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 "c of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3.Tolerance : includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.