Home > Products > Switching Power Supply > DR Series Single Output Industrial DIN Rail Power Supply

DR Series Single Output Industrial DIN Rail Power Supply

60W Single Output Industrial DIN Rail Power Supply (Model: DR-60-12/24/48)

Input: 85 ~ 264VAC 120 ~ 370VDC
Modulation System: PWM
MTBF: 216.2K hrs min. MIL-HDBK-217F (25
Safety Standard: En60950
Description:
INQUIRY EMAIL

DR Series Single Output Industrial DIN Rail Power Supply

Features

1. Universal AC input/Full range
2. Protections: Short circuit / Overload / Over voltage
3. Cooling by free air convection
4. Can be installed on DIN rail TS-35/7.5 or 15
5. Isolation class I
6. LED indicator for power on
7. 100% full load burn-in test
8. 2 years warranty

Technical Parameters

MODEL		DR-60-5	DR-60-12	DR-60-15	DR-60-24
OUTPUT	DC VOLTAGE	5V	12V	15V	24V
	RATED CURRENT	6.5A	4.5A	4A	2.5A
	CURRENT RANGE	0-6.5A	0-4.5A	0-4A	0-2.5A
	RATED POWER	32.5W	54W	60W	60W
	RIPPLE & NOISE (max.) Note.2	80mVp-p	120mVp-p	120mVp-p	150mVp-p
	VOLTAGE ADJ. RANGE	4.75-5.5V	11.1 -13.2V	13.5-16.5V	21.6-26.4V
	VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±1.0%	±1.0%	±1.0%	±1.0%
	LOAD REGULATION	±1.0%	±1.0%	±1.0%	±1.0%
	SETUP, RISE TIME	100ms, 30ms/230VAC 200ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	100ms/230VAC 23ms/115VAC at full load
INPUT	VOLTAGE RANGE	88 - 264VAC 124-370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	76%	82%	83%	84%
	AC CURRENT (Typ.)	1.2A/115VAC 0.8A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 18A/115VAC	36A/230VAC
PROTECTION	OVERLOAD	105 -160% rated output power
	OVERLOAD	Protection type: Constant current limiting, recovers automatically after fault condition is removed
	OVERVOLTAGE	5.75-6.9V	13.8-16.2V	17.25-20.25V	27.6-32.4V
	OVERVOLTAGE	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-20 - +60'C (Refer to "Derating Curve")
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85'C, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/-C(0~50-C)
	VIBRATION	10 - 500Hz, 2G 10min./1 cycle, period for60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL60950-1, TUV EN60950-1 approved, Design refer to EN50178
	WITHSTAND VOLTAGE	l/P-0/P:3KVAC
	ISOLATION RESISTANCE	l/P-0/P:100M Ohms / 500VDC / 25'C/ 70% RH
	EMC EMISSION	Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
OTHERS	MTBF	216.2K hrs min. MIL-HDBK-217F (25"C)
	DIMENSION	789356mm (WHD)
	PACKING	0.3Kg; 48pcs/15.4Kg/1.02CUFT
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 To of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3.Tolerance : includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.